Mahim sits between the sea and the creek, with the Mahim Causeway running north. The old societies around Mori Road have tight bathrooms and small or no lifts. Prabhadevi, further south beyond Dadar, has towers facing the sea with large bathrooms and a service lift. The humidity is high across all of it. We fit shower glass across Mahim and Prabhadevi, with fittings chosen for the damp.
A tight bathroom off Mori Road
The societies off Mori Road have bathrooms where the shower, WC and basin share one wet floor. There is often a window onto a narrow gap between buildings, and little daylight.
A fixed glass screen keeps the shower spray to one side and leaves the room open to move in. We use clear glass, so what light there is passes through. A frosted panel would make a dim room dimmer.
The walls are old and thick. We check them with a level and use a slim wall profile where they lean. The glass is toughened safety glass, which matters in a room where you are always close to it.
Sea humidity on both sides of Mahim
Mahim has the sea on the west and the creek on the north. Damp air comes from both. The monsoon lasts months, and a bathroom here stays wet long after the shower is off.
Shower fittings live in that damp. Plated hinges and handles spot and then rust. We fit stainless steel hinges, brackets and handles in a grade made for coastal air. They cost a little more and they do not spot.
Where the room allows, we also leave a small gap at the top of a fixed screen. Air moves, and the glass dries. Mould on silicone is the usual complaint in a damp bathroom, and air movement is what stops it.
Sea-facing bathrooms in the Prabhadevi towers
The towers along the Prabhadevi shore have large bathrooms, often with a window to the sea. A full frameless cubicle fits well: a fixed panel, a hinged door, hinges on the glass.
The walls are straight and there is a service lift. We check the shower kerb with a level before cutting glass. Spray comes through an open window on windy days, so the fittings are marine-grade stainless steel.
The building office sets hours for noise and asks for fitters' names. We handle that before the day. Drilling is short and done inside the hours. The glazing and sealing are quiet and carry on after.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















