The sector towers of Airoli are settled homes, and many bathrooms have an aluminium-framed shower enclosure from years ago. The frame has turned white and powdery. The door sticks in its runner. The job in Airoli is to take that out cleanly and fit glass that will not go the same way. The geyser on the shower wall and the old fixing holes both have to be planned for.
Taking out a corroded aluminium enclosure in an Airoli flat
An old aluminium frame corrodes in the damp Navi Mumbai air. White powder forms, the runner pits, and the door grinds.
We cut the old silicone, unscrew the frame and lift the glass out in one piece where we can. The tiles behind it are usually sound but marked where the frame sat.
The new enclosure is placed so its channel or fittings cover the old frame line. Where a hole shows, we fill it with grout close to the tile colour. A new frame, if you choose one, is powder-coated aluminium, which does not powder like the old bare metal.
The geyser on the shower wall
In many Airoli bathrooms the geyser hangs on the wall inside the shower. A fixed glass panel must clear it, and the glass must not sit where its heat lands.
We set the panel so there is a hand's width between the glass and the geyser. The pipes are kept outside the panel line where the plumbing allows.
If the geyser is in the way of the only sensible panel line, we say so. Moving a geyser is a plumber's job and a small one. Cutting a notch in toughened glass is not possible.
Frameless, or a frame that will not corrode
After an aluminium enclosure, most people in Airoli ask for frameless glass. It has no runner to pit and almost no metal to corrode.
Frameless needs square walls. In a settled tower the walls are usually close, but we check with a level. Where a wall leans, a slim powder-coated frame hides it and seals better along the floor.
Either way the hinges, clamps and handles are stainless steel. That is what the old enclosure did not have, and why it failed.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.















