At your location in just 29 minutesGet the measurements right away.T&C

Illustration: Shower door hinge pulling away from the tiled wall at a loose screw

Shower doors · Bengaluru, Delhi NCR, Mumbai MMR and Pune

Shower Door Loose or Wobbly? Causes & Repair Cost

A shower door that wobbles is a door moving in its fittings, and each fitting has its own fix.

₹2,210/ pair starting price₹2,60015% off

The starting price for Shower Door Hinge Replacement, the commonest fix. One fixed price per pair, supplied and fitted.

  • Verified on-site measurement
  • 2-year product warranty, 6 months on the work
  • Fitted by our own team. We never subcontract.
Also searched as

The short answer

A shower door feels loose when the glass moves in its fittings rather than with them. The usual causes are hinge screws loose in the wall, or a hinge gasket worn thin so the glass shifts. On a sliding door it is a loose bottom guide, and on any door a handle plate working loose. A door that has dropped and rubs is a different fault, sagging, which has its own page. Each cause is fixed with the glass you already have.

The useful distinction

Hold the glass still and move the fitting on its own

A hinge that moves while the glass stays still is loose at the wall. Glass that moves inside a steady hinge has a worn gasket. A handle that rocks on its own is a handle fault only.

Why it happens

Usually one of these 4 things, commonest first. Each one says how to tell, and what we do about it.

  1. The hinge screws have loosened in the wall

    How to tell
    The whole door sways when you push it, and the hinge plate lifts off the tile a little. The screws may turn freely or spin without biting. A door closed hard many times a day works screws loose.
    What we do
    We fit new hinges with fresh fixings into sound wall, using plugs matched to tile and brick. Where the old holes are worn we fill them and fix in a new position on the same plate.
    Shower Door Hinge ReplacementFrom ₹2,210 / pairSee this fix
  2. The gasket inside the hinge has worn thin

    How to tell
    The hinge is firm on the wall, but the glass moves inside it. The gasket is the rubber pad between the hinge and the glass. When it flattens, the glass rocks in the hinge and clicks as the door swings.
    What we do
    We fit a new pair of hinges with fresh gaskets, using the holes already in your glass. Worn gaskets let metal reach glass, so we do not leave them in.
    Shower Door Hinge ReplacementFrom ₹2,210 / pairSee this fix
  3. A sliding door is loose at the bottom guide

    How to tell
    The bottom of a sliding door swings in and out when you touch it. The guide, the small channel that steers the door at the floor, has worn or come loose. The rollers at the top may also be worn, so the door hangs crooked.
    What we do
    We fit new rollers and a new guide, and set the door so it runs straight. The guide is fixed firmly and sits where the door cannot escape it.
    Shower Door Roller ReplacementFrom ₹1,360 / pairSee this fix
  4. The handle plate has worked loose on the glass

    How to tell
    Only the handle moves, and the glass stays firm. The handle rocks, or the fixing on the inside has come away from the outer half. The rubber washers between handle and glass have flattened.
    What we do
    We fit a new handle with fresh washers on both sides and tighten it snug. A handle that keeps loosening is replaced rather than retightened.
    Shower Door Handle ReplacementFrom ₹935 / handleSee this fix

What you can check first

These checks are safe to do yourself. A photo or a short video of what you find helps us come prepared.

  • Hold the glass firmly with one hand and move each hinge with the other.
  • Look at the hinge plates on the wall for a gap between plate and tile.
  • On a sliding door, push the bottom edge gently and see how far it moves.
  • Take a short video of the door moving, with sound, so the clicks can be heard.

If the glass moves inside a hinge, stop using the door until it is fixed. A hinge gasket that has gone lets the glass slip, and a door can drop out of a worn hinge. Close it gently and keep children out of the shower.

What the repair costs

Every fix on this page, with its starting price before GST. We find which one you need, and you get a fixed price before any work starts.

FixStarting priceHow it is pricedLink
Shower Door Hinge Replacement₹2,210/ pair₹2,60015% offOne fixed price per pair, supplied and fitted.See this fix
Shower Door Handle Replacement₹935/ handle₹1,10015% offOne fixed price per handle, supplied and fitted.See this fix
Shower Door Roller Replacement₹1,360/ pair₹1,60015% offOne fixed price per pair, supplied and fitted.See this fix

Not sure which one it is? Send a photo or a short video. We will tell you what it looks like, usually within minutes, before anyone comes out.

Common questions

My shower door is loose but it is not sagging. Is that a different problem?

Yes. A loose door moves in its fittings but still hangs at the right height. A sagging door has dropped, so it rubs or leaves a wedge-shaped gap. Loose fittings can lead to sagging later, so it is worth fixing early.

Can I just tighten the hinge screws on a wobbly shower door?

You can try, gently, if the screws still bite. Screws that spin have lost their grip in the wall and need new fixings. Do not overtighten a hinge on glass, because that can crack the panel.

Why does my glass shower door click when it swings?

A click usually comes from glass shifting inside a worn hinge gasket. Each swing moves the glass a fraction against the metal. It is a warning rather than a danger yet, but the gasket should be replaced soon.

Does a loose shower door mean the glass itself is damaged?

Usually not. The glass is fine and only the fittings have worn. We check the hinge holes in the glass for chips while we work. A chipped hole is the one case where the panel needs changing.

Related problems

Other problems with the same kind of door, window or fitting, and where to go next.

Get it fixed at your place

We come to you anywhere in Bengaluru, Delhi NCR, Mumbai MMR and Pune. We find the cause, and give you a fixed price before any work starts.

  • Toughened safety glass, at the thickness stated in your written quote.
  • The fittings, finish and supplied parts are named before you approve the job.
  • We source the glass and fittings against the specification in your written quote.
  • We check the quality before we leave. Most jobs are done in 3 to 4 days.
  • No hidden fees. GST is shown as its own line on the quote.
  • Your details stay protected and confidential on a secure connection.
  • You get dedicated support after fitting, from the same team every time. They are dependable.
  • Easy and transparent from the first message. We work customer-first, so the job stays hassle-free.
Chat on WhatsApp