
Aluminium, uPVC and wooden doors · Bengaluru, Delhi NCR, Mumbai MMR and Pune
Door Lock Stuck? Causes & Repair Cost
A stuck lock is usually a dry cylinder or a door that has dropped, and force makes both worse.
₹1,615/ lock starting price₹1,90015% off
The starting price for Glass Door Lock Replacement, the commonest fix. One fixed price per lock, supplied and fitted.
- Verified on-site measurement
- 2-year product warranty, 6 months on the work
- Fitted by our own team. We never subcontract.
The short answer
A door lock sticks when the cylinder has seized with dust and old oil, or the key has worn. The other common cause is a door that has dropped, so the bolt binds in its keeper. A snapped key or a bent bolt leaves the door stuck until the lock is changed. Never force the key, and never pour oil into the cylinder. We open the door without damage and fit or reset the lock.
The useful distinction
Try the key again with the door lifted a little
Lift the door by its handle and try the key once more. A key that now turns was blocked by a bolt binding in its keeper. A key that stays stuck has a seized or broken cylinder. A key that turns but moves nothing has a broken lock body.
Why it happens
Usually one of these 5 things, commonest first. Each one says how to tell, and what we do about it.
The cylinder of a glass door's patch lock has seized
- How to tell
- A patch lock is the small metal box on the corner of a frameless glass door. The key went stiff over weeks and now stops partway. Dust and old oil have gummed the pins inside the cylinder.
- What we do
- We change the cylinder, or the whole patch lock if its bolt has worn too. The new lock fits the same cutout in the glass. You get a fresh set of keys.
Glass Door Lock ReplacementFrom ₹1,615 / lockSee this fixThe aluminium door has dropped and the bolt binds in its keeper
- How to tell
- The keeper is the plate in the frame that the bolt slides into. The key turns only when someone lifts or pushes the door. Shiny scrape marks show on the keeper where the bolt now hits it.
- What we do
- We reset the hinges or rollers so the door sits at its proper height. Then we line up the keeper with the bolt. A cylinder that seized from the strain is changed on the same visit.
Aluminium Door RepairFrom ₹2,070See this fixA wooden door's lock has seized, or the key has worn
- How to tell
- The key is the original, worn smooth on its cuts after years of use. It rattles in the cylinder and will not lift the pins. A newer copy of the key may still work.
- What we do
- We fit a new cylinder in the existing lock body where the body is sound. A lock worn through is changed for a new one of the same size. Cutting into the wood for a bigger lock is carpentry, which we do not do.
Wooden Door RepairFrom ₹1,710See this fixA key has snapped off inside the cylinder
- How to tell
- Part of the key is still in your hand, and the rest is inside the lock. Nothing else goes in, and the door stays as it was, open or locked. This happens on any door where a stiff key was forced.
- What we do
- We open the door from the lock side without breaking the glass, the wood or the frame. The cylinder with the broken piece is changed, not picked out. The old keys are useless after that, so you get a new set.
Wooden Door RepairFrom ₹1,710See this fixThe bolt of the patch lock has bent
- How to tell
- Someone pulled the glass door hard while it was locked. The key turns, but the bolt sticks halfway and will not clear the floor socket.
- What we do
- A bent bolt is not straightened, because it bends again. We fit a new patch lock and check the floor socket for damage.
Glass Door Lock ReplacementFrom ₹1,615 / lockSee this fix
What you can check first
These checks are safe to do yourself. A photo or a short video of what you find helps us come prepared.
- Lift the door slightly by the handle and try the key gently once.
- Try a different copy of the key, because a worn original often fails first.
- Look at the keeper plate in the frame for fresh scrape marks.
- Do not spray oil into the cylinder. Dry graphite powder is the only safe thing to try.
- Photograph the lock and the key, and tell us whether the door is stuck open or shut.
A person locked inside a bathroom or a room is an emergency. Call your society's security or a neighbour first, and do not let a child wait alone behind a stuck door. We do not do locksmith work on safes, almirahs or car locks.
What the repair costs
Every fix on this page, with its starting price before GST. We find which one you need, and you get a fixed price before any work starts.
| Fix | Starting price | How it is priced | Link |
|---|---|---|---|
| Glass Door Lock Replacement | ₹1,615/ lock | One fixed price per lock, supplied and fitted. | See this fix |
| Aluminium Door Repair | ₹2,070 | One visit covers travel and the work to fix the fault. Any parts are priced on their own line. | See this fix |
| Wooden Door Repair | ₹1,710 | One visit covers travel and the work to fix the fault. Any parts are priced on their own line. | See this fix |
Not sure which one it is? Send a photo or a short video. We will tell you what it looks like, usually within minutes, before anyone comes out.
Chat on WhatsAppA photo or a video is enough to startCommon questions
My door lock is jammed. How do I open it without breaking anything?
Lift or push the door while turning the key gently. If the bolt was binding, it frees and the key turns. If it does not, stop. Forcing it snaps the key or the cam inside, and then the lock has to be cut out.
Why will the key not turn in the lock even though it is the right key?
Either the cylinder has seized or the key has worn. Keys wear smooth after years, and a worn key stops lifting the pins. Try a spare copy first. If the spare also fails, the cylinder needs changing.
Is a uPVC door lock that is stuck the same problem?
No, a uPVC door locks at several points along its edge with one handle. That fault has its own pages, uPVC door not locking and uPVC door stuck. This page is for the single lock on a glass, aluminium or wooden door.
Can oil free a stuck door lock?
Oil frees it for a day and then gums the pins with dust. That is often what seized the cylinder in the first place. A dry graphite lubricant is safe. If the key still sticks after that, the cylinder is worn and is changed.
Related problems
Other problems with the same kind of door, window or fitting, and where to go next.
Aluminium, uPVC and wooden doors
Same fixes, other problems
Get it fixed at your place
We come to you anywhere in Bengaluru, Delhi NCR, Mumbai MMR and Pune. We find the cause, and give you a fixed price before any work starts.
- Toughened safety glass, at the thickness stated in your written quote.
- The fittings, finish and supplied parts are named before you approve the job.
- We source the glass and fittings against the specification in your written quote.
- We check the quality before we leave. Most jobs are done in 3 to 4 days.
- No hidden fees. GST is shown as its own line on the quote.
- Your details stay protected and confidential on a secure connection.
- You get dedicated support after fitting, from the same team every time. They are dependable.
- Easy and transparent from the first message. We work customer-first, so the job stays hassle-free.