
Aluminium, uPVC and wooden doors · Bengaluru, Delhi NCR, Mumbai MMR and Pune
uPVC Door Stuck or Hard to Open? Causes & Repair Cost
A stuck uPVC door is usually out of place, not broken, and forcing it is what breaks it.
₹2,070 starting price₹2,30010% off
The starting price for uPVC Door Repair, the commonest fix. One visit covers travel and the work to fix the fault. Any parts are priced on their own line.
- Verified on-site measurement
- 2-year product warranty, 6 months on the work
- Fitted by our own team. We never subcontract.
The short answer
A uPVC door that is stuck or hard to open has usually dropped on its hinges. Its bottom edge then catches the sill. The other common causes are a jammed multipoint lock, and a frame that bows in hot weather. Drainage slots blocked with monsoon mud do it too. Do not force the handle or heat the key. We open the door without damage, then set the hinges, the lock and the frame in that order.
The useful distinction
Find where the door touches before touching the handle
A door that drags at the bottom corner has usually dropped on its hinges. A door that will not move with the handle up is jammed in its lock. A door stiff only in summer has a frame that bows in the heat.
Why it happens
Usually one of these 5 things, commonest first. Each one says how to tell, and what we do about it.
The door has dropped on its hinges
- How to tell
- The bottom corner on the handle side drags on the sill, the raised strip under the door. You lift the door by its handle to open it. A gap shows along the top on the same side.
- What we do
- uPVC hinges have adjusting screws for height and side. We set them so the door sits square and clears the sill. Hinges that have worn past adjusting are replaced as a set.
uPVC Door RepairFrom ₹2,070See this fixThe multipoint lock has jammed with the door shut
- How to tell
- A multipoint lock throws several bolts along the door edge when the handle lifts. The handle now will not move up or down, or it moves and the door still holds. The key may turn and nothing happens.
- What we do
- We release the jammed lock without damaging the door or the frame. Then we replace the gearbox, the part behind the handle that drives the bolts, if it has failed. The keeps on the frame are reset so the new lock closes without force.
uPVC Door RepairFrom ₹2,070See this fixThe frame has bowed, so the door binds in the heat
- How to tell
- The door is fine on a cool morning and sticks by afternoon. It binds at the top or the lock side, not the bottom. Sun falls on the door for most of the day.
- What we do
- We check how the frame was fixed to the wall and add fixings where it has pulled away. Then we set the door and the keeps to the frame as it now sits. A dark door in full sun may need more side clearance than it was given.
Stuck Door RepairFrom ₹1,710See this fixThe drainage slots are blocked and the bottom sits in water
- How to tell
- The door sticks most after rain. Water stands in the bottom track or at the sill. Mud and dust have packed the small slots at the bottom of the frame.
- What we do
- We clear the slots and the track so water drains out. Then we check the rollers or the bottom seal for rust. Clearing is part of the visit. Rusted parts are priced before they are changed.
Stuck Door RepairFrom ₹1,710See this fixThe frame has bowed past adjusting
- How to tell
- The door has been set and reset, and it sticks again within weeks. The frame is visibly out of line with the wall. The panels rock in the frame.
- What we do
- No adjustment holds in a frame that has gone out of shape. We fit a new uPVC sliding door made for the opening, with the frame fixed to the wall properly. We say this only after trying the adjustments first.
uPVC Sliding DoorsFrom ₹650 / sq ftSee this fix
What you can check first
These checks are safe to do yourself. A photo or a short video of what you find helps us come prepared.
- Lift the door slightly by its handle, with the handle down, and see whether it then opens.
- Look along the top and the lock side of the closed door. A gap wider at one end means the door has dropped.
- Notice whether the door is worse in the afternoon heat or after heavy rain.
- Look at the bottom of the frame outside for the small drainage slots, and whether they are packed with mud.
- Take a photo of the door edge with the handle up, so we can see the bolts along it.
Do not heat the key, hammer the handle or lever the door with a screwdriver. uPVC scorches and the lock gearbox snaps, and a snapped gearbox leaves the door locked shut. If you are locked out or locked in, call us and we open it without damage.
What the repair costs
Every fix on this page, with its starting price before GST. We find which one you need, and you get a fixed price before any work starts.
| Fix | Starting price | How it is priced | Link |
|---|---|---|---|
| uPVC Door Repair | ₹2,070 | One visit covers travel and the work to fix the fault. Any parts are priced on their own line. | See this fix |
| Stuck Door Repair | ₹1,710 | One visit covers travel and the work to fix the fault. Any parts are priced on their own line. | See this fix |
| uPVC Sliding Doors | ₹650/ sq ft | You pay this rate for the square feet we measure on site. | See this fix |
Not sure which one it is? Send a photo or a short video. We will tell you what it looks like, usually within minutes, before anyone comes out.
Chat on WhatsAppA photo or a video is enough to startCommon questions
Why is my uPVC door getting stuck at the bottom?
The door has usually dropped on its hinges, so its bottom corner catches the sill. uPVC doors are heavy for their hinges, and the screws settle over the years. The hinges have adjusting screws, so the fix is often setting, not new parts. A door that also sits in water after rain needs its drainage slots cleared first.
How do I open a uPVC door that is jammed shut?
Pull the door firmly towards you, or push it away, while lifting the handle gently. That takes the weight off the bolts so they can move. If the handle will not move at all, stop there. Forcing it snaps the gearbox, and we then have to open the door and replace it.
Why does my uPVC door stick only in summer?
uPVC expands in heat, and a dark door in full sun expands most. A frame fixed to the wall at too few points also moves with it. The door then binds at the top or the lock side in the afternoon. More fixings and a little more clearance usually settle it.
Is a stiff uPVC door handle the same problem as a door that is stuck?
They are close, and they share causes. A stiff handle on a door that still opens has its own page, uPVC door not locking. A door that will not open, or drags open, is this page. Both start with checking whether the door has dropped.
Related problems
Other problems with the same kind of door, window or fitting, and where to go next.
Aluminium, uPVC and wooden doors
Same fixes, other problems
Get it fixed at your place
We come to you anywhere in Bengaluru, Delhi NCR, Mumbai MMR and Pune. We find the cause, and give you a fixed price before any work starts.
- Toughened safety glass, at the thickness stated in your written quote.
- The fittings, finish and supplied parts are named before you approve the job.
- We source the glass and fittings against the specification in your written quote.
- We check the quality before we leave. Most jobs are done in 3 to 4 days.
- No hidden fees. GST is shown as its own line on the quote.
- Your details stay protected and confidential on a secure connection.
- You get dedicated support after fitting, from the same team every time. They are dependable.
- Easy and transparent from the first message. We work customer-first, so the job stays hassle-free.