At your location in just 29 minutesGet the measurements right away.T&C

Illustration: A sliding-door hook latch stuck partway out of its lock case

Sliding doors · Bengaluru, Delhi NCR, Mumbai MMR and Pune

Sliding Door Lock Stuck? Causes & Repair Cost

A balcony door locked shut is not a reason to force it, because the glass is what breaks first.

₹1,190/ lock starting price₹1,40015% off

The starting price for Sliding Glass Door Lock Replacement, the commonest fix. One fixed price per lock, supplied and fitted.

  • Verified on-site measurement
  • 2-year product warranty, 6 months on the work
  • Fitted by our own team. We never subcontract.
Also searched as

The short answer

A sliding door lock gets stuck when the hook is caught in its keeper and cannot lift clear. That usually happens because the shutter has dropped on its rollers. A cylinder seized with dust, a worn key or a jammed gearbox on a uPVC door are the other causes. We open the door without damage and change the part that failed.

The useful distinction

Work the handle with the shutter pulled towards you

Pull the shutter towards you with one hand and work the handle with the other. A lock that frees that way is caught because the door has dropped. A key that will not turn either way is seized in its cylinder. A handle that moves with nothing happening has broken inside.

Why it happens

Usually one of these 4 things, commonest first. Each one says how to tell, and what we do about it.

  1. The hook has jammed in its keeper

    How to tell
    The handle turns part of the way and stops. The hook is the curved bolt that catches the keeper on the frame. It is bent or worn and will not lift clear. The door is shut tight and will not slide.
    What we do
    We free the hook from inside the frame and fit a new hook lock in the same cutout. Then we set the keeper so the new hook releases cleanly.
    Sliding Glass Door Lock ReplacementFrom ₹1,190 / lockSee this fix
  2. The key will not turn in the cylinder

    How to tell
    The key goes in but will not turn either way, or turns only with force. Dust and old oil have seized the cylinder, or the key has worn. On a balcony door the cylinder faces the weather all year.
    What we do
    We change the cylinder, the part the key goes into, and give you new keys. If the whole lock set has worn, we change it as one unit.
    Sliding Glass Door Lock ReplacementFrom ₹1,190 / lockSee this fix
  3. The shutter has dropped, so the hook cannot lift clear

    How to tell
    Lifting the shutter slightly by its handle frees the lock. The bottom corner on the lock side has sunk. Rollers worn low leave the hook pulling hard against the keeper.
    What we do
    We lift the shutter of an aluminium door back to its height and reset the keeper to meet the hook. Worn rollers are changed on the same visit, priced first.
    Aluminium Door RepairFrom ₹2,300See this fix
  4. A uPVC multipoint lock or gearbox has jammed shut

    How to tell
    A uPVC slider locks at several points along its edge with one handle. The handle is stuck down, or moves with no click. The door is shut on every lock point at once.
    What we do
    We release the lock points from the edge without cutting the frame. Then we fit a new gearbox or lock strip that suits the door.
    uPVC Door RepairFrom ₹2,070See this fix

What you can check first

These checks are safe to do yourself. A photo or a short video of what you find helps us come prepared.

  • Pull the shutter towards you and try the handle again, gently.
  • Lift the shutter a little by the handle and see if the lock frees.
  • Try the key both ways, without force, and notice whether it turns at all.
  • Do not lever the shutter with a screwdriver or a rod, because the glass cracks before the lock gives.
  • Photograph the lock from inside with the handle in the stuck position.

Do not force the handle, hammer the lock or lever the shutter open. Toughened glass bursts into a shower of pieces when its frame is twisted. Use another door until the lock is freed.

What the repair costs

Every fix on this page, with its starting price before GST. We find which one you need, and you get a fixed price before any work starts.

FixStarting priceHow it is pricedLink
Sliding Glass Door Lock Replacement₹1,190/ lock₹1,40015% offOne fixed price per lock, supplied and fitted.See this fix
Aluminium Door Repair₹2,300One visit covers travel and the work to fix the fault. Any parts are priced on their own line.See this fix
uPVC Door Repair₹2,070₹2,30010% offOne visit covers travel and the work to fix the fault. Any parts are priced on their own line.See this fix

Not sure which one it is? Send a photo or a short video. We will tell you what it looks like, usually within minutes, before anyone comes out.

Common questions

Is a stuck sliding door lock the same problem as a door that will not lock?

No. A door that will not lock still opens, and that fault has its own page. A stuck lock holds the door shut, though the parts are usually the same hook and keeper. The cure is the same lock, but the first job is opening the door without damage.

How do I open a sliding door that is locked shut and jammed?

Pull the shutter towards you and lift it a little while you turn the handle. That frees most hooks that are caught on their keeper. If it does not free, leave it shut and book the visit. Forcing it breaks the glass or the frame.

Can a jammed sliding door lock be fixed from inside the flat?

Yes, nearly always. A sliding door lock sits in the edge of the shutter and is reached from the room side. We do not need to be on the balcony to open it.

Why does my balcony door lock seize every summer?

Dust blows into the cylinder and the hook slot all year, and heat dries the little grease inside. The key then grinds instead of turning. A dry lubricant spray in the cylinder twice a year keeps it moving.

Related problems

Other problems with the same kind of door, window or fitting, and where to go next.

Get it fixed at your place

We come to you anywhere in Bengaluru, Delhi NCR, Mumbai MMR and Pune. We find the cause, and give you a fixed price before any work starts.

  • Toughened safety glass, at the thickness stated in your written quote.
  • The fittings, finish and supplied parts are named before you approve the job.
  • We source the glass and fittings against the specification in your written quote.
  • We check the quality before we leave. Most jobs are done in 3 to 4 days.
  • No hidden fees. GST is shown as its own line on the quote.
  • Your details stay protected and confidential on a secure connection.
  • You get dedicated support after fitting, from the same team every time. They are dependable.
  • Easy and transparent from the first message. We work customer-first, so the job stays hassle-free.
Chat on WhatsApp