Flats here are handed over with the bathroom tiled and plumbed but nothing marking off the shower. So the enclosure is the last piece and the first real decision the owner makes about the room. It is worth taking a little time over, because everything afterwards is arranged around it.
Deciding the layout while the flat is empty
In an unfurnished flat the enclosure position is genuinely open, and that freedom closes as soon as the bathroom is in daily use.
What matters is the door swing, whether you walk past wet glass to reach the basin, and whether the towel ends up inside the splash line.
So we tape the footprint on the floor and ask you to walk it before anything is ordered. People change their mind at that point more often than not, and at that moment it costs nothing.
Fitting before the furniture arrives
An empty flat is much the easiest place to fit an enclosure: clear access, nothing to protect and room to handle a panel safely.
Once furniture is in, the same job takes longer and the risk shifts from the glass to your belongings.
So where the flat is still empty this is the moment, and it is worth arranging before a move-in date rather than after. It is also the only point at which the layout can still genuinely be reconsidered.
Checking the handover before covering it up
Once glass is fixed to a wall, whatever is behind it becomes difficult to reach and difficult to argue about.
So this is the moment to check that the floor falls to the drain, that no tile sounds hollow, and that the wall is straight where the glass will land.
All three are handover items and far easier to put to a builder before something has been fitted over them. We check them as part of the survey and tell you what we find, whichever way it goes.
Record the Raj Nagar Extension bathroom before glass covers it
Photograph the marked glass line, drain and wall fixing zones at the survey. If a tile, floor fall or plumbing position needs the builder's attention, you then have a clear pre-installation record. Once that issue is corrected, we confirm the final measurement rather than ordering against a surface that was meant to change.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.
