Planning work at Piramal House
Separate the private-home job from shared-property work
A repair inside one home and work on a shared entrance are different orders. For a home, list the affected windows, doors or shower fittings by room. For shared work, identify the committee or manager who can approve the scope and receive the quotation. Do not combine private flat costs with common-area work without an agreed split.
For several homes, use one schedule with a row per opening. Include the flat reference, reported fault, quantity and access contact. Similar-looking windows may use different fittings after earlier replacements. A site visit checks the actual parts before anyone treats every home as the same repair.
Ask management about worker entry, material delivery, permitted drilling times and waste removal. These arrangements must come from the property; the service listing does not establish them. A booking request is also not proof that the society has appointed Fabrockers as its maintenance contractor.
Confirm these details before the visit
- Who approves shared work and who pays for each home?
- Can each resident provide access during the agreed slot?
- What entry, delivery and debris arrangements does management require?
- Are external windows, balcony rails or facade changes part of the request?
Choose the job by the fault or the result you need
Use the checks below to describe the job. They do not assume which fittings are installed at Piramal House.
A sliding window or balcony door that drags
Tell us whether the shutter sticks all along the track, catches at one point, or moves freely but will not lock. These are different faults, even when they feel similar.
The visit checks the track, rollers, frame alignment and locking points. A worn roller may be replaceable while the frame stays. A bent track or damaged frame needs a separate repair decision. We identify the fitted part before quoting a replacement.
Note which shutter is affected and whether it is aluminium or uPVC, if known. Keep the window accessible. Do not lift a heavy shutter out to find the roller number.
Relevant services: Sliding Window Repair · Sliding Door Roller Replacement · Sliding Door Track Repair · uPVC Window Repair
Water or air coming around a window
Record where the water first appears: the track, the frame-to-wall joint, the glass edge or the wall above. Note whether it happens during rain, cleaning or both.
Water on a sill does not identify its route into the room. The inspection separates drainage, gasket and alignment faults from problems in the surrounding wall. The quote should name the joint or part being repaired, rather than promise to cure every possible leak with sealant.
Keep the affected area visible and describe what was previously sealed. Ask how the repair will be checked after work. Do not block drainage slots or reach outside an upper-floor window.
Relevant services: Window Water Leakage Repair · Window Seal Replacement · Window Gap Sealing
Choosing window and door mosquito mesh
Start with how each opening moves. A sliding window, an inward-opening casement and a frequently used balcony doorway need different clearances.
Check whether an existing mesh frame can be reused, whether a new track has room, and how the shutter will be removed for cleaning. Compare the mesh, frame, handle and track as one system. An insect screen is not a fall-prevention barrier.
List the windows separately and mark any grill, curtain or handle obstruction. Ask which measurements determine the billed area and what happens at uneven edges. Keep access to the entire frame during the survey.
Relevant services: Window Mosquito Net & Mesh · Mosquito Net & Mesh Replacement · Sliding Mosquito Net Door
A leaking, sagging or newly planned shower enclosure
For a repair, distinguish water through the door gap from water at the wall or floor joint. For a new enclosure, identify the opening, shower position and nearby toilet or basin.
Door swing, wall alignment, floor slope and the fixing surface affect the design. The measured quotation should specify the panel arrangement, glass, fittings and seals. Existing holes constrain replacement hardware; a similar-looking hinge is not automatically compatible.
Clear the bathroom for measurement and say whether the tiles are finished. Do not order toughened panels from rough measurements: toughened glass cannot be cut to fit after processing. Agree the usable opening and handle position before production.
Relevant services: Shower Door Hinge Replacement · Shower Door Seal Replacement · Shower Cubicle & Glass Door Repair
A loose railing or balcony glass
Keep the affected edge out of use if a panel or support moves. Do not test it by leaning on it, and do not tighten clamps while standing outside the barrier.
A railing is a complete assembly of glass, supports, fixings and the structure beneath. Replacing a clamp alone is suitable only when the underlying problem has been assessed. The replacement glass specification cannot be decided from a photograph of its colour.
Arrange the building manager's access approval and describe the floor and approach. Ask for the scope of inspection, replacement parts and handover checks in writing. External or height-access work needs a separate plan before the job is accepted.
Relevant services: Glass Railing Repair · Glass Railing Clamp Replacement · Balcony Glass Replacement
Compare a complete scope, not just a starting rate
The catalogue shows starting prices in each service's unit. A per-piece rate and a per-square-foot rate describe different quantities. Ask the quote to state the measured quantity, material specification, fittings, finish, labour and GST separately. Identify removal, disposal, access equipment and making-good work explicitly.
For repairs, ask which existing parts will remain and which will be changed. For new glass, agree dimensions, holes, cut-outs, edge finish and hardware positions before production. If the scope changes after the visit, obtain the revised price before the additional work starts.
Check the finished work before handover
Operate the repaired door or window with the fitter present. Check movement, latching, handle operation and the finish around replaced parts. For a shower or sealing repair, agree the appropriate leak check and any curing time before use. Do not assume that a visual inspection proves a performance rating.
Keep the itemized invoice, the named product or fitting and the care instructions. Record any remaining work and the contact for follow-up. Do not attempt to adjust heavy glass panels or replace unfamiliar hardware yourself if the movement changes after fitting.
Technical reading behind these checks
These manufacturer guides explain glass and hardware considerations. They do not identify the products installed at this property.












































































