A great deal of the glazing work in Karol Bagh happens on a mezzanine - the half floor inserted above a shop to give it an office, a store or a fitting area. Headroom there is limited, access is a steep stair, and every decision about glass is shaped by those two things.
Partitions where you cannot stand fully upright
A mezzanine often has under two metres of headroom, so a standard full-height partition simply does not apply.
The useful approach is a partition that stops below the ceiling with an open gap above, which keeps the air moving and stops the space feeling like a box.
It also makes the panels shorter and lighter, which matters a great deal when they have to go up a steep stair. Where privacy is needed at a desk, a lower panel with a frosted band does the job without closing the space in.
Getting panels up a mezzanine stair
Mezzanine stairs are steep, narrow and frequently have a low soffit at the top, which is the tightest point.
A rigid panel has to clear that soffit while being tilted, and the geometry is unforgiving.
So we measure the headroom at the top of the stair as well as the stair itself, and size panels to clear it. Where nothing usable will pass, we bring the glass up through the shop front before the shutters are fitted, or build the partition in narrow sections.
A glass front to the mezzanine, overlooking the shop
Many mezzanines have a glazed front looking down into the shop, which lets the office watch the floor and borrows the shop's light.
That glass is a barrier at a height people can fall from, so it is not an ordinary partition - it has to be toughened or laminated and fixed to take a load pushed against it.
We build those with a proper top rail and fixings rated for it, not as a decorative screen. It is the one place on a mezzanine where the specification genuinely matters.
How the job works
- Tell us about the jobSend a few photos, rough sizes and what you need. Use WhatsApp or the form. For a repair, a short video of the door moving helps a lot.
- We call you back in about 2 minutesWe confirm what you need and a time to visit. Where we can, we give you a rough price on the call.
- We come and measureWe measure the opening and check the walls, floor and ceiling around it. Anything made to size is made to these measurements, so they must be right.
- You get a written priceIt lists each item, with GST as its own line. If anything about the job changes, we tell you before we go ahead.
- We fit itYou approve the price and pay the advance. Our own team fits the work, checks that every door and window opens and closes properly, and clears up. Most jobs are done in 3 to 4 days.
